APPENDIX J7
ASSEMBLY INSTRUCTIONS
SINGLE - SIDED MAX MEDIA MOUNT
3401 Mary Taylor Road
Birmingham, Alabama 35235
(205) 439-8200
Drawn By: JW
Sheet Title
PARTS LIST:
#
LABEL
NAME
1
MAX MEDIA MOUNT
MQ-LM4QD
SINGLE SIDED
MEDIA MOUNT
DOUBLE SIDED
CONVERSION
KIT
MQ-LM4 Q
MQ-LM4QC
1st Step)
THIS SET OF ASSEMBLY INSTRUCTIONS FOCUSES
ON THE SINGLE - SIDED MOUNT (MQ-LM4QD).
THE SAME PROCEDURES APPLY WHEN SETTING
UP THE DOUBLE SIDED (MQ-LM4Q) AND THE
DOUBLE SIDED CONVERSION KIT (MQ-LM4QC)
2nd Step)
AN M10 HEX KEY WILL BE INCLUDED WITH
THE MOUNT THAT WILL BE USED TO FASTEN
THE EXTRUSIONS TOGETHER.
USE THE M10 HEX KEY TO TIGHTEN
THE LOCKS THAT ATTACH THE VESA TV
MOUNT TO THE ARMS.
ATTACH THE ASSEMBLED ARMS TO THE
“I” SHAPED CENTER VERTICAL SUPPORT
USING THE PROVIDED RED THUMBSCREWS
AND WING NUTS.
NOTE:
EXPODISPLAY’S® WILL OFTEN ADD ARROWS ON
THE EXTRUSIONS TO INDICATE THE IDEAL LOCATION OF
THE MONITORS. SIMPLY CONNECT THE ARROWS.
M10 HEX KEY
4th Step)
LINE THE MONITOR’S CENTER WITHIN
THE CENTER OF
THE FRAME. THEN
GENTLY HOOK THE UNIT’S BACK
ONTO THE FRAME
THE “I ” SHAPED CENTER HOOKS ON TO
THE B ACK OF THE M QXF24 F RAME.
THE CIRCLES
REPRESENT THE
EXTRUSION
LOCKS.
TIGHTEN THE
LOCKS USING
THE HEX KEY BY
TURNING IT
CLOCKWISE
UNTIL THE
MECHANISM
LOCKS INSIDE
THE CHANNEL .
5th Step)
CHECK TO MAKE SURE MONITOR BRACKET IS
LEVEL USING BUBBLE INDICATOR ON FRONT
