8
Before assembling the frame, its end-walls must already be covered with the polycarbonate sheets. The
end-walls and the intermediate arcs are connected to each other with 5 rows of the connecting elements
(crossbars) using bolts, washers, and nuts through the drilled holes. A wrench size 10 is required for the
installation.
The crossbars are mounted under the arcs from the inner side of the greenhouse, with the nut being
screwed onto the bolt from the inner side too (
Figure 6
).
The cross bars are connected by attaching the end crossbars to the crossbars with connecting bends on
one end (
Figure 6
).
Figure 6 –
The mutual arrangement of the arcs and the crossbars during assembly
Figure 7 -
The mutual arrangement of the arcs and crossbars of the greenhouse frame (side view)
Step 4. Covering the frame with the cellular polycarbonate
End-walls
Arcs
Connecting crossbar
End crossbar
Summary of Contents for ATLAS
Page 1: ...MANUAL ATLAS ...
