Installation
Mounting
DMX-Connection
Use specified DMX-cables to connect the units to each other and to connect them to the control-
desk. Enter the addresses and personalities to the units.
DMX512
CONTROLLER
............
DMX Addr.1
DMX Addr.
(Nx1)+1
DMX Addr.
(Nx2)+1
E-37
Hanging
The fixture can be mounted in a hanging position using the quicklock brackets.
Fixture must be safe mounted in accordance with the relevant regulations and
provided with a safetycord to prevent falling. For this purpose, an eyelet for
safeties is attached to the device.
Standing
The fixture can be mounted in an upright or sitting position. A safe and
sufficient anti-slip ground must be ensured!
NOTE
The LED module can be operated in any position.
Summary of Contents for WD 600 Hybrid
