EN
Page | 17
SHORT CIRCUIT!
Water in the housing can cause a short
circuit.
Never immerse the appliance in water.
Cleaning the appliance
1.
Pull out the mains plug.
2.
To dismantle the appliance, see
"Getting to know the appliance".
(
Fehler! Verweisquelle konnte n
icht gefunden werden.
)
3.
Clean the jug and filter in a rinsing
bath.
4.
Clean the housing with a soft cloth.
5.
After cleaning, rub all parts dry.
6.
Then reassemble the appliance.
Descaling
•
The manufacturer recommends to
descale the appliance regularly, as a
heavily calcified appliance increases
the power consumption.
•
The intervals at which you should
descale the appliance depend on the
hardness of the water used and the
frequency of use.
•
Descale the appliance every 3
months for normal use and soft
water and 1x per month for hard
water.
•
Information about the water
hardness can be obtained from the
responsible waterworks.
•
Descale the appliance at the latest if
the boiling process takes a long time
or if heavy lime deposits have
formed on the heating plate in the
water tank.
•
Fill the descaling liquid into the
water tank. For this purpose, you
can mix household vinegar with
water in a 1:1 ratio or use
commercial descaler. When using a
descaler, follow the manufacturer's
instructions for use.
•
Boil the descaling liquid in the
appliance.
•
Leave the liquid to soak for about
half an hour after boiling
•
If the calcification is more severe,
boil the liquid a second time.
•
Then pour away the liquid.
•
Boil fresh tap water and pour away
after boiling.
•
Now the appliance is descaled and
you can use it again as usual.
Storage
Clean the appliance again if necessary.
Store the appliance and all accessories in a
dry place away from direct sunlight and
from access by children or animals.
