ExSilent Qgo, Manual

2

English

1

 In the box

1

  Qgo module

2

  Battery

3

  Qgo soft tip  package 

4

  Carrying box

5

  Qgo Quick start guide

2

 Placing the battery

While using a new battery: first remove the sticker 

from the (+) positive side.

•

  Insert the battery between the battery contacts of 

the module: the flat side (+) positive side  of the 

battery should be placed on the large battery 

contact.

3

 Inserting Qgo in the soft tip

Correct placement of the module in the soft tip is 

essential for a good sound and a proper performance 

of Qgo. Therefore always check the following points to 

ensure that the module has been inserted in the soft 

tip correctly: 

1

  The module is orientated correctly if inserted as in 

the image: The flat side with the serial number 

and the battery facing towards the pull cord, the 

brand name (logo) facing away from the removal 

handle.

2

  The top of the flat side of the module should fall 

just under the last ridge of the removal handle.

3

  An imaginary line running between the round cap 

and the push button should be parallel to the 

removal handle.

4

  The edge of the soft tip should fit over the groove 

around the module. When fit together, a dark 

contact stripe will be visible around the module.

If one or more of these points are not carried out 

correctly, the sound quality or the fit in the ear may not 

be optimal or the device might whistle (feedback). If 

this happens, hold the soft tip and turn and/or push 

the module into the correct position or remove the 

module and reinsert it in the soft tip.

4

 Placing Qgo in the ear

Insert the device into the ear by pressing on the flat 

side of the device (with the push button) in a small 

circular motion. Now gently ‘massage’ the device 

deeper into the ear. If the mouth is opened wide, 

insertion will be easier. The use of insertion crème/

cosmetic skincare/gel considerably eases the 

insertion. 

Make sure your hands are clean while inserting the Qgo. 

Make-up, crème, body oil, gel, hairspray and likewise 

products can dirty up the module and can, for example, 

contribute to the clogging of the microphone opening.