3
English
Removing Qgo from the ear
Hold the removal handle firmly and pull it – always
slowly – out of the ear.
5
Adjusting the volume
The push button is used to select the volume setting
you prefer. By touching the push button briefly, one of
four pre-set volume levels can be selected. These levels
are softer, as well as louder.
One can identify the volume level by the number of
beeps that will sound after touching the push button.
After insertion of the battery, the device is set by
default to the initial volume. Just a short touch to the
push button will produce two beeps, indicating that
the next volume level is activated. After another short
touch to the push button, three beeps will be audible
indicating that volume level three has been activated.
Another touch to the push button will activate volume
level four. While you are in level four, after pressing the
push button one beep becomes audible and the
device sets back to the initial volume level.
Cleaning
The building up of ear wax differs from one person to
another. Therefore, from time to time it cannot be
avoided that the sound outlet of the soft tip will be
clogged with ear wax. In case you observe that the
sound outlet of the soft tip has been clogged, you may
clean the soft tip or replace it.
Module:
•
Clean regularly with a soft and dry tissue.
Soft tip:
•
Clean regularly with a soft and dry tissue.
N.b.: Never use aggressive cleaning products, abrasives
or solvents! This can cause irrevocable damage to the
soft tip or the module.
Storage
At night:
We recommend that you remove both soft tip and
battery from your Qgo during the night and store it in
a secure place outside its box. In this way, you increase
the operational life of the battery and also allow for the
evaporation of moisture possibly present in the device.
Short term storage:
You may use the carrying box, when you want to
remove the device from the ear temporarily.
Long term storage:
When you don’t use your Qgo over a longer period of
time, clean the module and soft tip before storing
