Exsound EXSOUND Pearl llI H, User Manual

Pearl llI H Connects to PS3™ 

PS3™/ PlayStation

 Network Settings 

■

 PS3™ Audio Settings                            

■

 PlayStation  Network  Settings 

Go to PS3™ dashboard and select : 

Settings -> Sound Settings -> Audio output settings 

->Optical Digital -> Dolby Digital 5.1 CH 

Go to PS3™ dashboard and select: 

Settings -> Accessory Settings -> Audio Device Settings 

-> Set both the input & Output to “USB PnP Sound  Device 

Note: Make sure that the DTS Box is not checked as 

this will cause some games to have no Audio 

10

1. Connect Pearl III H Headset with Breakaway Inline Controller Cable

2. Connect USB Communication cable to an USB port on PS3™ and the decoder box. 

    Connect the Second USB plug when the time it has not enough electricity to Power on.

    (Note:The Second USB plug Can be removed once it has been Power on.)

3. Connect the decoder box and PS3™ with Optical cable. 

4. Plug round 6-pin plug (Male) from inline controller into front of the decoder box. 

5. Slide the Optical/Analog switch on the decoder box to “Optical “. 

6. Power on PS3™ and decoder box. 

®

®