12
English
EX
-
1195HMS
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
4. Hardware Installation
Because there are large differences between PC’s, we can give you only a general in-
stallation guide for the EX
-
1195HMS. Please refer your computer’s reference manual
whenever in doubt.
1.
Install the EX
-
1195HMS to the wall or to a DIN
-
Rail if required.
2.
Connect the USB 3.1(Gen1) cable with the USB 3.0/3.1(Gen1) Upstream C
-
Port at the
EX
-
1195HMS.
3.
Connect the optional power supply to the Terminal Block at the Hub.
4.
Now connect the other end from the USB 3.1(Gen1) cable (A
-
Plug) to the USB
A
-
Port at your PC.
Holes for
Wall Installation
DIN
-
Rail Clip
Installation to
DIN
-
Rail
