background image

           380224       Ver. 1.5    5/05

 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and 
workmanship for one year from date of shipment (a six month limited warranty applies on sensors and 
cables). If it should become necessary to return the instrument for service during or beyond the warranty 
period, contact the Customer Service Department at (781) 890-7440 ext 210 for authorization. A Return 
Authorization (RA) number must be issued before any product is returned to Extech. The sender is 
responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. 
This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, 
operation outside of specification, improper maintenance or repair, or unauthorized modification. Extech 
specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not 
be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to 
repair or replacement of the product. 
The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or 
implied. 

 

 
 
 
 

Copyright © 2005 Extech Instruments Corporation. 

All rights reserved including the right of reproduction 

in whole or in part in any form. 

 

Summary of Contents for 380224







Reviews: