382100-EU-EN v2.2 07/13
18
4.5.6 Potential Transformer (PT) Setup
1.
Press SHIFT once, and the symbol " SHIFT1 " will switch off; press
▲
or
▼
to adjust the
PT value (the range is 1 to 1000)
2.
Press SHIFT again to return to screen 1 (Fig. 4-5-6a) and then press
▼
to enter the next
function (PT CT)
Figure 4-5-6a: PT Setup (Screen 1)
Figure 4-5-6b: PT Setup (Screen 2)
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524