6
421502-en-GB_V2.0 3/19
Alarm Operation
Press the "HI/LO Limits" button to enable the alarm mode (the meter will beep, and the
audio icon will appear). Set the low and high alarm limits in the SET mode. When the
actual temperature reaches the low or high alarm limit a continuous tone will be
produced. To silence the alarm (and to disable the alarm mode), press the
“
HI/LO Limit
”
button (the audio icon will disappear).
Battery Replacement
Replace the 9V battery when the low battery icon appears on the upper left or when the
meter will not power up. To replace the battery, remove the
meter’s
protective jacket
and remove the two screws that secure the rear battery compartment cover. Remove the
battery, install a new battery observing correct polarity, secure the battery compartment,
and replace the
meter’s protective jacket
.
Battery Safety:
Please dispose of batteries responsibly and never dispose of batteries in a fire,
batteries may explode or leak. When storing the meter for 60 days or more, remove the battery
and store separately.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection
sites, the retail store where the batteries were purchased, or wherever batteries are
sold.
Disposal:
Do not dispose of this instrument in household waste. The user is obligated to take
end-of-life devices to a designated collection point for the disposal of electrical and electronic
equipment.
Calibration and Repair Services
FLIR Systems, Inc. offers calibration and repair services
for the Extech brand products we sell. We
offer NIST traceable calibration for most of our products. Contact us for information on calibration
and repair availability, refer to the contact information below. Annual calibrations should be
performed to verify meter performance and accuracy. Product specifications are subject to change
without notice. Please visit our website for the most up-to-date product information:
Contact Customer Support
Customer Support Telephone
: U.S. (866) 477-3687; Interna1 (603) 324-7800
Calibration, Repair, and Returns email
: repair@extech.com
Technical Support
Copyright
©
2019 FLIR Systems, Inc.
All rights reserved including the right of reproduction in whole or in part in any form
