42560 V5.0 8/08
10
Analog Output
The Model 42560 is supplied with a banana plug pair to 3.5mm mini-plug cable. The
mini-plug end of the cable connects to the meter’s Transmitter base. The banana plug
test lead end can be connected to an external device such as a MultiMeter, chart
recorder, magnetic tape storage device, etc. to collect readings. An analog output of
1mVDC per degree F is provided from the output jack of the transmitter base.
Internal Datalogging
The 42560 has a 20-reading internal memory. Use the MODE button to scroll to the
LOG display (small LOG icon on the bottom left of the LCD).
Press and hold the SET button to store the current reading in the memory location
represented by the number shown next to the LOG icon.
Use the arrow keys to scroll through view data in the 20 locations.
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
