Model 42582 Version 6.0 Sept 2007
5
Manual Datalogging Mode
This instrument has two datalogging modes,
MEM
Manual Datalogging (99 records
maximum) and
Automatic Datalogging (12,000 records maximum). Data saved in the
Manual Datalogging mode can be recalled in the display, printed or transferred to a pc.
Manual Datalogging basics
To take a reading and store it in memory:
1. Press
the
F2
MEM
softkey from the WELCOME screen.
2.
Use the arrow buttons to select a memory location (1 through 99).
3.
Press and hold the
ON
key to take a measurement as previously described. Release
the
ON
key to end the test.
4. Press
the
F4
SAVE
or the
F1
ABORT
key.
Manual Datalogging Display Screen 1
F1
EXIT
:
Press to return to the WELCOME screen
F2
MEAS
Press to enter the measurement mode.
F3
EDIT
:
Press to begin customizing the header in the current memory location. Header
customization is covered in a dedicated section later in this manual.
F4
NEXT
Go to Manual Datalogger Screen 2.
Manual Datalogging Display Screen 2
F1
EXIT
:
Press to return to the WELCOME screen
F2
CLR
:
Press for one second to erase the current memory location. Press and hold for
longer than one second to erase all records currently held in memory.
F3
PRN
:
Press to print one or more readings. The instrument will prompt the user for a
start and end memory point.
F3
BACK
:
Go to Manual Datalogger screen 1.
01:
07-06
05:42:50
Ext:
82.0 F
Ir: 82.0 F
o
o
EXIT
NEXT
EDIT
MANUAL DATALOG SCREEN 1
MEAS
02: 07-06
05:42:55
Ext:
82.0 F
Ir: 82.0 F
o
o
01:
07-06
05:42:50
Ext:
82.0 F
Ir: 82.0 F
o
o
EXIT
BACK
PRN
MANUAL DATALOG SCREEN 2
CLR
02: 07-06
05:42:55
Ext:
82.0 F
Ir: 82.0 F
o
o
