background image

                                                      15          CO220-en-US_V1.5   8/20 

Two-year Warranty 

FLIR Systems, Inc. warrants this Extech brand instrument 
to be free of defects in parts and workmanship for two 
years
 from date of shipment (a six-month limited warranty 
applies to sensors and cables). To view the full warranty 
text please visit: 

http://www.extech.com/support/warranties

. 

 

Calibration and Repair Services 

FLIR Systems, Inc. offers calibration and repair services for the Extech 
brand products we sell. We offer NIST traceable calibration for most of 
our products. Contact us for information on calibration and repair 
availability, refer to the contact information below. Annual calibrations 
should be performed to verify meter performance and accuracy. Product 
specifications are subject to change without notice. Please visit our 
website for the most up-to-date product information

www.extech.com

. 

 

Contact Customer Support 

Customer Support Telephone List

https://support.flir.com/contact

 

Calibration, Repair, and Returns

repair@extech.com

 

Technical Support

https://support.flir.com

 

 

 Copyright © 2013-2020 FLIR Systems, Inc. 

All rights reserved including the right of reproduction in whole or in part in any form 

www.extech.com

 

 

 

 

Summary of Contents for CO220
















Reviews: