EA80 V2.1H 11/06
7
Manual Dataogging
Storing readings
Press "
MEM
" button. LCD will display "
M
" and the
memory address number. Total
memory size is 99 readings.
Viewing readings.
Press "
READ
" button to enter READ mode. The LCD
will display "
R
" and the memory address number.
Press "
" or "
" button to scroll through stored readings
Press "
↵
" enter button to exit this mode.
Deleting stored data
Press “
SET
” button three times, the LCD will display “
CLr
” and enter the clear
memory mode.
Press “
↵
” button to clear the all manually stored readings.
If you wish not to clear the memory press “
SET
” button two times then press “
↵
” button
to exit the clear memory mode.
Auto Datalogging
Setting interval time
Press “
SET
” button two times, the “
INTV
” mark is displayed and enter to the setting
interval time mode.
Press “
” or “
” button to select desired interval time from 1 second to 255 seconds.
Press “
↵
” button to store the setting value and exit this mode.
Auto Datalogging mode
Press and hold “
MEM
” button for two seconds (3 beeps), the LCD will display “
¯
”and
the memory location.
“
M
” will flash each time a recording is made
The maximum memory capacity is
20,000
recordings and that can be divided into
99
sets.
Press “
↵
” button to exit this mode and stop recording.
Deleting Logged Data
Press “
SET
” button four times, the “
CLr
” and “
¯
” mark will be displayed
Press “
↵
” button to clear the auto datalogged memorized data and exit this mode.
If you choose not to clear the memory, press “
SET
” button again then press “
↵
” button to
exit the clear memory mode.
SET MAX MIN
ALM
R
M
Err
INTV
Err
CO
2
ppm
ppm
%RH
d-h
CO
2
DEW
WET
°C°F
ppm
CO
2
m:s
8888
8888 8888
88
CAL
