V.
OPERATIONAL GUIDE
A.
This meter can be operated with batteries or 9V Adaptor, If using
batteries, remove the rear cover and install the batteries (observe
polarity). If using the 9V Adaptor, ensure that is connected firmly and
correctly. Select the desired temperature probe for your application
and insert it into the tempture probe socket.
B.
Press the button to power the meter. If “ ” appears, check that
the probe is connected properly and that it is operational.
C.
To enter the programming mode, press the “
MENU
” button, to exit,
press it again. Use the left and right arrow buttons (
or
) to
select a parameter for editing; Use the up and down buttons (
or
) to increase or decrease the value of a parameter. When
modifing a parameter, the parameter’s symbol will blink.
The available parameters in sequence:
1.
INTERVAL PRINTING STATUS (01/ENABLE, 00/DISABLE):
See LCD display example below in Fig-5
Fig-5
2.
TYPE OF THERMOCOUPL (K/J/E/T) :
Fig-6
