MO265-EU-EN-V1.0-10/10
8
Battery Replacement
If the instrument does not switch ON or displays the low battery symbol, replace the battery
as follows:
1.
Slide off the rear battery compartment cover
2.
Replace the 9V battery
3.
Secure the battery compartment
4.
You, as the end user, are legally bound (EU Battery ordinance) to return all used
batteries, disposal in the household garbage is prohibited! You can hand over
your used batteries / accumulators at collection points in your community or
wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the
device at the end of its lifecycle
Maintenance
•
Always keep the instrument dry
•
To clean, wipe the meter with a damp cloth. Use a mild detergent if necessary but
never use abrasives or solvents.
•
Prevent dirt from accumulating at the electrode pins
Specifications
Display
Backlit LCD digital display and tri-color LED bargraph scale
Resolution
0.1%
Accuracy
Pin mode: ± (5% rdg + 5 digits)
Pinless mode is a relative reading only
Measurement principle
Electrical resistance (pins)
Electromagnetic sensor (pinless)
Range
0.0 to 99.9 %Relative (pinless)
6.0 to 94.8 %WME (pins)
Electrode pin length
11mm (0.44”)
Electrode pin type
Integrated, replaceable
Power supply
9V alkaline battery
Low Battery Indication
Battery symbol displayed on LCD
Meter housing
Impact-proof plastic
Operating Temperature
0 to 50
o
C (32 to 122
o
F)
Operating Humidity
80% Relative Humidity maximum
Dimensions
203 x 58 x 43mm (8 x 2.3 x 1.7”); not including remote probe
Weight
204g. (7.2 oz); not including remote probe
Copyright © 2010 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form.
