MO270-EU-EN-v2.1 11/12
15
Battery Replacement
If the instrument does not switch ON or displays low battery symbols, recharge the batteries as
detailed earlier in this guide. If the batteries require replacement, the unit must be returned for
service.
Maintenance
Always keep the instrument dry
To clean, wipe the analyzer with a damp cloth. Use a mild detergent if necessary but never use
abrasives or solvents.
Prevent dirt from accumulating at the electrode pins
Specifications
Display
Full color graphical display
Measurement resolution
0.1
Measurement accuracy
Pin mode: ± (5% rdg + 5 digits)
Pinless mode is a relative reading only
Measurement principle
Electrical resistance (pins)
Electromagnetic sensor (pinless)
Measurement ranges
0.0 to 99.9 Relative (pinless)
7.0 to 99.3 %WME (pins)
Electrode pin length
0.75” (22mm)
Electrode pin type
Integrated, replaceable
Transmission frequency
Analyzer/sensor communication frequency: 2.4GHz
Power supply
Rechargeable Li-Polymer batteries (not user replaceable)
Low Battery Indication
Battery symbols (for analyzer and sensor) displayed on LCD
Analyzer housing
Impact-proof plastic
Operating Temperature
32 to 122
o
F (0 to 50
o
C)
Operating Humidity
80% Relative Humidity maximum
Dimensions
8 x 2.3 x 1.7” (203 x 58 x 43mm); not including remote probe
Weight
7.2 oz. (204g); not including remote probe
Copyright
©
2012 FLIR Systems, Inc.
All rights reserved including the right of reproduction in whole or in part in any form
ISO-9001 Certified
