VB300 V1.1 11/10
2
Introduction
Congratulations on your purchase of the VB300 G-Force Datalogger. The Model VB300 can measure and record
shock and vibration (acceleration) readings over its ± 18g measurement range. This device will record 3-axis
g-force and related peaks to provide a history of shock and vibration conditions. The real time clock provides time
stamps for all data.
The user can easily configure the logging rate, high/low alarm and start-mode, and download the stored data by
plugging the VB300 into a PC's USB port and running the supplied PC software. Measurement data can be plotted,
printed and exported for use with other applications such as word processors and spreadsheets. The data logger
is supplied with a long-life 1000 hour lithium battery.
The VB300 memory uses a 4MB Flash device that can hold 85,764 peak acceleration samples and 210 freefall
samples.
This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Features
Records 3-axis g force shock and vibration
Built-in
accelerometer
Measures static and dynamic acceleration
Real time operation (time stamped data)
Normal and Motion detection mode
Real time FFT frequency analysis
Manual and Automatic datalogger start modes
Selectable data sampling rate
Status Indication via Red and Green LEDs
USB Interface for Set-up and Data Download
User-Programmable motion thresholds
Long battery life - 1000 hours
