VIR50-EU-EN v2.3 5/14
16
Type k
Press the ENTER button to enable or disable the Type k contact thermocouple input..
NOTE
:
If a Type-k probe is inserted into the meter’s thermocouple jack (in the compartment over
the measurement trigger), ‘Enable’ will be selected by default. Select the Disable setting to prohibit
the LCD from displaying Type-k temperature.
Color
Use the
▲
and
▼
buttons choose a color. Press the ESC button
to exit and save.
Memory Setting Mode
From the Video + IR, IR-only, or Dew Point modes, press the ENTER button to access the soft-key
screen. The Memory Settings mode is represented by the icon on the right. Use the arrow buttons to
scroll over to the right icon (if it is not already highlighted). Press the ENTER button again when the
right icon is highlighted to access the Memory Settings mode.
Use the
▲
and
▼
buttons to select Picture, Video or Logs and then press the ENTER button to
access the selection.
Use the ENTER button to view a Picture, Video or Data log. Press the ENTER button to delete a
picture, video or log. Use the
▲
button to confirm a deletion and press the
▼
button to cancel a
deletion.
