1GB
CFI EXTEL SUNPOWER 60 - 04/2011 - V1
1
SAFETY INSTRUCTIONS
Important!
•
Please read the user manual thoroughly before installing or using this product.
•
If you install this product for other people, please give the manual or a copy to the end user
Warning:
•
The different elements can only be dismantled by an authorised technician. .
Safety instructions:
•
To safely use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
•
Specific warnings and caution symbols are indicated on the elements if necessary
Warning:
Follow these instructions:
•
The only connections made should be those provided in this manual: making any incorrect connections could be
dangerous and could seriously damage the system.
•
In view of the risks that may arise during the installation and usage phases of the product components should be
installed in accordance with the following recommendations: Do not make any modifications of any kind to any
parts of the device unless those modifications are described in this guide. Unauthorised operation will only lead
to operating problems. The manufacturer accepts no liability for damage resulting from products that have been
modified arbitrarily.
The charge regulator is intended for use in photovoltaic systems with 12V nominal voltages, It shall be used with
vented or sealed (VRLA) lead acid batteries only.
•
Batteries store a large amount of energy. Never short circuit a battery under all circumstances. We recommend
connecting a use slow acting type, according to the nominal regulator current) directly to the battery terminal.
•
Batteries can produce flammable gases. Avoid making sparks, using fire or any naked flame. Make sure that the
battery room is ventilated.
•
Avoid touching or short circuiting wires or terminals. Be aware that the voltages on specific terminals or wires
can be up to double the battery voltage. Use isolated tools. Stand on dry ground and keep your hands dry.
2
DESCRIPTION
1 •
60W polycrystalline pre-wired (3m) solar panel, 12V
2 •
Charge controller10A
3 •
Battery12V /55Ah
4 •
Voltage converter 150 W max
5 •
Adapter with cigarette lighter plug
6 •
12V /USB 5V cigarette lighter converter
3
USAGE
This kit is ideal to power several 12V or 230V
Ũ
appliances using the voltage provided converter
1. The charge controller adjusts itself automatically to 12V system voltage.
2. Detects day and night using the PV arrary.
3. It Can control loads by one time setting control or two times setting control,
4. Control load mode: Pure light control mode, light control on+ time control off (one time setting mode) light
control on+ time control off—time control on+light control off(two time setting mode)
5. Complete electronic protection, it protects the battery from being overcharge by the solar array and from being
deep discharged by the loads. It can antomatic adaptation to the ambient temperature.
6. PCB board using moisture proof processing.
Summary of Contents for SUNPOWER 60
Page 2: ...g 1 g 2 g 3 1 2 3 5 4 6 LED 3 LED 2 LED 1 1 2 10 mm 4 mm...
Page 46: ......
