12
3. Pool Unit
Use Air Compressor to clean strap powder inside the circled area completely.
Chapter 10 Repair and maintenance
(1)
The maintenance of the machine shall be done only by people who have been
authorized by distributor.
(2) Before maintaining the machine, cut off all power sources.
(3) Use appropriate tools and devices for maintenance and repair.
(4) Repair and maintenance should be conducted only by well-trained service persons.
Other Notes
(1) Do not touch the heater and surrounding area before they are fully cooled down.
The heater reaches temperature of about 380
℃
(2) Install the machine on horizontal floor and keep the surrounding area free from
dust and pieces of cut off the strap.
(3) If there is any obscure point about the machine operation and the maintenance,
please contact with the service engineer.
