16
● Trouble with strap setting and feeding ●
Symptom
(1) Strap is not fed at all. After strap setting
(2) Strap is temporarily fed, but rejected from the strap insertion inlet.
after strap setting.
(3) Strap is fed only up to the midway of the arch, after one strapping.
(4) Strap is not fed at all, after one strapping.
(5) Strap nipping occurs around the feed roller or reserve roller
Symptom
Causes
Remedy
1 2 3 4 5
O O O
A. Strap passing not properly done
See Operation Manual.4-2, 4-3
O O O
B. The reel brake done not work well,
and the strap tangles
Adjust
O
C. The strap or feed roller is slipping
due to oil contamination
Clean
O
D. Strap-collected length in the pool
is not enough
Adjust
* Adjust the actuator spring to
length of strap in the pool.
O E. Strap-collected length in the pool
is More than enough.
Adjust
* Adjust the actuator spring to Have
proper length of strap in the pool.
O
F. Feed timer set too short
Set the feed timer (VR4) to longer time
O G. The feed roller produces to much
Pressure.
Reduce the pressure.
O H. Strap is twist and jammed at
Reverse roller.
Turn reverse Switch until the strap is
entirely
exhausted out of machine. Then cut the
twisted part of the strap and re-thread it.
