6
4-2 Setting Strap Coil
Caution:
[Notes]
To place the empty strap core under the reel place (left) make this job easier.
If the coil setting direction is wrong, the reel brake does not work well, and a
Normal operation is not possible due to loose strap
Thrust Nut
Reel Plate (right)
Reel Shaft
Make sure
the strap
clockwise as
shown.
Reel Coil
Reel Plate (left)
Strap Core
[Procedures]
Step [1]
Remove the thrust nut by turning it clockwise
And remove the reel plate (left).
Remove the empty strap core.
Step [2 ]
Fit a new strap coil in the reel plate
(right). At this time, set the coil in such
a way that the strap winding direction is
clockwise
If the coil is set counterclockwise,
Re-set it, because the reel brake
does not work well at that way
Step [3]
Fit the reel plate (left) in the reel
Shaft key with the reel plate’s
Key groove
Step [4]
Finally, tighten the thrust nut strongly
