6
1.3
Safety Instructions Governing Specific Operational Phases
Avoid any operation mode that might be unsafe.
All necessary precautions to ensure that the machine is only used being in a safe and
reliable state are to be taken. The machine is only to be operated if all protective and
safety devices, including removable safety devices, emergency shut-off equipment,
noise-protection elements and exhaust systems are in right place and fully functional.
The machine is to be checked for damage and defects at least once per work shift. Any
changes including the working behavior of the machine are to be reported to
competent persons immediately. If necessary, the machine is to be stopped and
locked immediately.
In case of any malfunction the machine must be stopped and locked until the defect
has been eliminated.
Generally make sure that nobody is at risk before starting up the machine.
All personnel that will be operating this machine should be thoroughly trained in all
phases of operation and safety.
Always tighten unscrewed connections after maintenance and repair.
After completing maintenance and repair all safety devices removed for setting up or
repairing the machine must be reinstalled and checked for functionality prior to
putting the machine back into service.
To minimize the environmental impact all consumables and replaced parts must be
disposed of safely.
Before starting the machine check that the accessories have been stowed away safely.
Do not attempt any operation that may be a risk to the stability of the machine.
Summary of Contents for EXS-303
