51
ENGLISH
Mark the opening of the return (2x) on
the foil and cut away with a cutter .
Attach the second adhesive ring and seal-
ing ring to the liner and screw in with the
corresponding screws .
Snap the finishing cap onto the sealing
ring .
Mark the opening of the skimmer on the
foil . Attach the second sealing ring of
the skimmer on the liner . Make sure that
the screw holes in the seal ring match
those of the skimmer . Now screw on the
finishing cap (corresponding screws in the
skimmer box) .
Now cut out the piece of liner in the skim-
mer mouth . Then click on the cover plate .
Now you have to place the coupling and
connect it to the tap via a hose (see techn
section: 2 .4 .3 Connections) so that the
bath can be filled further .
Place the basket in the skimmer (2x) .
Close the skimmer with the lid . The pool is now
completely ready except for the technical part of
the filter installation .
Skimmer detail
