67
66
EN
EN
II. Technical specifications
Model number (part number)
8791816
1× Li-ion battery 20 V
4,000 mAh
(8891882)
1× charger
2.4 A
(8891893)
8791817
(without battery and without charger)
Max. terminal voltage of a battery without load
20 V DC
Nominal terminal voltage of a battery with load
18 V DC
Speed without load
0-950 min
-1
Number of percussions
0-4600 min
-1
Impact energy
2.6 J
Tool clamping system
SDS plus
MAX.
∅
OF DRILL HOLE
for concrete
24 mm
for metal
13 mm
for wood
30 mm
Adjustable chisel tool position (Vario lock)
YES
Right/left drill bit rotation direction setting
YES
Battery/motor overload protection
YES
Full battery discharge protection
YES
Adjustable chisel tool position in range 360°(Vario-Lock)
YES
WORK MODES
Impactless drilling
YES
Impact drilling
YES
Chiselling YES
BATTERY CAPACITY 4000 mAh
Drill bit
∅
6 × 50 mm
90 holes (concrete)
Drill bit
∅
8 × 50 mm
50 holes (concrete)
Drill bit
∅
12 × 70 mm
45 holes (concrete)
Drill bit
∅
16 × 70 mm
40 holes (concrete)
Drill bit
∅
30 × 50 mm
27 holes (wood)
Sound pressure level Lp(A); uncertainty K
83.5 dB(A); K=±3 dB(A)
Sound power level Lw(A); uncertainty K
94.5 dB(A); K=±3 dB(A)
Total vibration level on handle (sum of three axes):
• for drilling into concrete a
h,HD
; measurement uncertainty K
a
h,HD
9.855 m/s
2
; K= ±1.5 m/s
2
• for chiselling a
h,CH eq
; measurement uncertainty K
a
h,CH eq
9.441 m/s
2
; K= ±1.5 m/s
2
Weight with battery 4000 mAh
3.3 kg
Table 2
y
The declared aggregate vibration value and the declared noise emission level were measured in accordance with
standard testing methodology and may be used for the comparison of one tool with another. The declared aggregate
vibration value and the declared noise emission level may also be used for determining preliminary exposure.
9
The universal tool clamping system
SDS plus
enables rapid
tool-free clamping and replacement
of various
brands of work tools available on the market and also to use larger work tools for more demanding work.
9
The motor and the battery have
electronic protection against overloading
, which disco-
nnects the power supply when excessive load is detected.
9
The degree to which the trigger switch is pulled enable fine, gradual control of the rotation
speed a/or number of impacts, and thereby ensures a smooth ramp up, which reduces torque during start up
ensuring greater safety. Likewise, it is possible to set the rotation direction for the drilling mode.
9
The cordless hammer drill is part of the
SHARE 20 V
cordless
power tool range that is powered using the same type of battery.
9
The hammer drill variant
Extol® Industrial 8791816
is supp-
lied with a Li-ion battery
4000 mAh
, 20 V and charger
2.4 A
.
9
The hammer drill variant
Extol® Industrial 8791817
is supplied without
a battery and without a charger at a lower purchase price for the situation where
the user has already purchased the battery and charger with another cordless
power tool from the
SHARE 20 V cordless product range
that is powered using
the same type of battery
9
Thanks to the very slow self-discharge of the Li-ion battery, the
battery remains ready for use even long after it has been charged.
Furthermore, the Li-ion battery can be recharged at any time,
regardless of its charge level without reducing its capacity.
The battery is equipped with electronic
protection against full discharge, which
damages it and which shuts off el. power
supply when the battery's terminal voltage
falls below a certain threshold.
BATTERIES AND CHARGERS FROM THE CORDLESS PROGRAM SHARE 20 V
ARE AVAILABLE FOR PURCHASE IF REQUIRED
Battery
SHARE 20 V
Model number
(Part number)
Chargers
SHARE 20 V
Model number
(Part number)
Battery
8 000
mAh
Extol® 8891886
4 A
charger
Extol® 8891892
Battery
6 000
mAh
Extol® 8891885
2×
3.5 A
charger (for 2 batteries)
Extol® 8891894
Battery
5 000
mAh
Extol® 8891884
4×
3.5 A
charger (for 4 batteries)
Extol® 8891895
Battery
4 000
mAh
Extol® 8891882
2.4 A
charger
Extol® 8891893
Battery
2 000
mAh
Extol® 8891881
Table 1
ONE-BATTERY SYSTEM
