59
58
EN
EN
Order number/model
8890207
8890101
8890210
401232
Vibration level a
h,HD
;
uncertainty K ±1.5 m/s
2
15.8
13.6
14.6
13.7
Vibration level a
h,CH
;
uncertainty K ±1.5 m/s
2
13.6
12.8
12.6
12.7
Weight without the power cord 5 kg
7.1 kg
5.5 kg
4.5 kg
Protection
IP 20
IP 20
IP 20
IP 20
Protection class - double
insulation
yes
yes
yes
yes
y
The declared aggregate vibration value and the declared noise emission level were measured in accordance with
standard testing methodology and may be used for the comparison of one tool with another. The declared aggregate
vibration value and the declared noise emission level may also be used for determining preliminary exposure.
•
WARNING
y
Vibration and noise emissions during actual use of the power tool may differ from the declared values depending on
the method in which the tool is used, particularly the type of workpiece that is being worked on.
y
It is necessary to determine the safety measurement for the protection of the operator, which is based on the assess-
ment of exposure under real operating conditions (to include all the parts of the work cycle such as time for which the
tool is turned off and when running idle outside the time that it is in operation).
y
The level of acoustic pressure and acoustic power was measured according to EN ISO 3744 and exceeds the value of 85 dB(A),
therefore, use suitable hearing protection during use, otherwise exposure to the effect of the noise may result in hearing loss.
II. Features
Chiselling and drilling hammer Extol Craft 401232 is an
excellent choice for home hobbyists at a reasonable price.
Chiselling and drilling hammers Extol Premium are the
right choice for those placing primary importance on
quality - at an acceptable price. However, these hammer
drills are not intended for long term daily use, for example
in the trades or industry.
y
All the hammer drills are equipped with a safety
clutch, which reduces the transfer of the maxi-
mum torque to the hands of the user when the
drill bit jams, which increases health protection
for the user during work. This clutch provides pro-
tection to the hammer drill‘s spindle and motor.
The hammer drills are intended:
a) For drilling holes primarily of larger diameters than is
possible with impact drills, that is:
y
with percussion into concrete, bricks and stone.
y
without percussion into wood, steel, plastics, ceramics, etc.
b) For chiselling work into concrete, bricks, stone and asphalt
(e.g. for making grooves or chiselling openings/holes).
With the use of appropriate tools, also for chiselling away
wall tiles, floor tiles, wall plaster, construction glue, etc.
On hammer drill models 8890207, 8890210 and Extol Craft
401232 it is also possible to set an impactless drilling mode.
The hammer drill Extol® Premium 8890207 is equi-
pped with a chisel lock, which enables the chisel
to maintain the same pre-set position during the
chiselling process (chisel lock function).
The universal tool clamping system SDS Plus and SDS
max enables rapid tool-free tool clamping.
On hammer drill model 8890210 fine rotation and
impact control is possible by varying the degree to
which the trigger switch is pressed.
The weight of the massive hammer drill 8890101 is
reduced thanks to the metal structure being made
from a light, yet durable, magnesium alloy.
Introduction
EN
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms and regulations
of the European Union.
Contact our customer and consulting centre for any questions at:
www.extol.eu
Manufacturer
: Madal Bal a. s., Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic.
Date of issue
: 19. 3. 2014
I. Technical specifications
Order number/model
8890207
8890101
8890210
401232
Product category
Extol Premium
Extol Premium
Extol Premium
Extol Craft
Power input
1,500 W
1,250 W
1,250 W
1,050 W
Impact force
5.5 J
10 J
4 J
5 J
Number of percussions min
-1
4,200
2,800
0-3,900
4,000
Speed without load min
-1
800
450
0-800
900
Max.
∅
of drill hole
for concrete
32 mm
40 mm
30 mm
26 mm
for steel
13 mm
13 mm
13 mm
13 mm
for wood
40 mm
40 mm
40 mm
40 mm
Speed/impact control
no
no
yes
no
Right/left rotation
no
no
no
no
Chisel lock
yes
no
no
no
Possible uses
Impactless drilling
yes
no
yes
yes
Impact drilling
yes
yes
yes
yes
Chiselling
yes
yes
yes
yes
Tool clamping
SDS plus
SDS max
SDS plus
SDS plus
Input voltage/frequency
220-240 V~50 Hz
220-240 V~50 Hz
220-240 V~50 Hz
220-240 V~50 Hz
Acoustic pressure Lp(A);
uncertainty K ±3 dB(A)
89.1 dB(A)
89.3 dB(A)
90.1 dB(A)
90.3 dB(A)
Acoustic power Lw(A);
uncertainty K ±3 dB(A)
97.2 dB(A)
97.2 dB(A)
97.1 dB(A)
98.1 dB(A)
