61
60
EN
EN
Fig. 2, Position-description
On Fig.2, there is the hammer drill model 8890101.
1) Anti-dust cover
2) SDS tool clamping head
3) Gearbox cover for the application of Vaseline
for lubrication
4) Trigger switch
5) Main handle
6) Indicator light showing connection of power tool
to el. power.
On model 8890210, the indicator light is located on
the side of the handle.
7) Power cord
8) Motor vents
9) Work mode toggle between impact drilling/chiselling
10) Auxiliary swivel handle
11) Additional protective anti-dust cover
12) Two-pin key for removal/installation of the gearbox
cover for the application of Vaseline
2
8
9
10
1
3
Fig. 2
4
5
6
7
11
12
III. Parts and control elements
Fig. 1, Position-description
On Fig. 1 there is hammer drill model 8890207, which
has identical control elements as hammer drill 8890210
and Extol® Craft 401232. However, their appearance is
different.
1) Protective anti-dust cover
2) SDS tool clamping head
3) Gearbox toggle switch for impact/impactless
drilling and chiselling modes and for setting
the chisel tool position
4) Gearbox cover for the application of Vaseline for lubrication
5) Trigger switch
6) Main handle
7) Power cord
8) Work mode toggle switch: impact/impactless drilling
and chiselling
9) Label with technical specifications
10) Motor vents
11) Auxiliary swivel handle
11
4
2
8
9
10
11
1
1
3
5
6
7
Fig. 1
