48
49
EN
EN
•
Do not disassemble the device and do not modify
it in any way.
•
Do not point the beam at mirror surfaces. The beam
could be deflected and hit the eyes of people.
•
When not using it, turn the laser off. This could
result in eyes being hit.
•
Do not place the device near data storage devices,
pacemakers and devices sensitive to magnetic
fields. A magnetic field could result in the loss of
data, endanger the life of a user with a pacemaker
or damage sensitive devices.
•
Place the device on a stable surface in a safe
location.
•
The laser device is sensitive equipment, so protect
it against impacts and rough handling. Protect
the laser beam outlet windows against breakage.
VI. Cleaning and
maintenance
•
When not using the device for an extended period
of time, remove the batteries. They could corrode
inside the device.
•
Keep the device clean, especially the laser beam
outlet windows. Make sure that there is no dust,
fluff from textiles or grease on the glass surfaces.
•
Clean the device using a damp cloth dipped in
a detergent solution.
•
Prevent fluid from entering the device while
doing this.
•
For cleaning, never use organic solvents (e.g.
acetone) or abrasive or aggressive bleach-based
cleaning product as this could damage the cover
of the device.
•
Never submerge the device in a liquid.
•
To exercise a warranty repair, please contact the
vendor from whom you purchased the product.
•
When not using the device, place it into the nylon
case. Store and transport the device in a portable bag
and protect it against impacts, temperatures exceed-
ing 45 °C, ingression of water and high humidity.
VII. Meanings of mark-
ings on the label:
4. Set the device to the desired position based on
the required tilt angle of the laser line. In the
event that it is necessary to tilt the device, use
it exclusively on a tripod (fig. 5) to prevent the
device from falling.
TURNING OFF THE DEVICE
•
To turn of the device, first set the toggle switch
(fig. 6, position 3) to the locked padlock position
and then press the On/Off button (fig. 6, position
1). When the toggle switch is set to the open
padlock position (device is set in the automatic
levelling mode), it will not be possible to turn the
device off by simply pressing the On/Off button
since the plump line first needs to be blocked
to protect the device against damage during
handling.
•
WARNING
•
Never carry the device unless the toggle switch
(fig. 6, position 3) is set to the locked padlock
position (i.e. the plumb line must be locked) and
the device is turned off and not projecting laser
beams, otherwise the levelling mechanics could
be damaged or eyes of people or animals could be
hit by the laser beam.
V. Safety Instructions
SAFETY INSTRUCTIONS FOR USING
THE LASER DEVICE
•
Prevent children, physically and mentally unfit
persons and uninstructed persons from using
the device. Ensure that children do not play with
the device.
•
Do not remove the technical rating label from
the device.
LASER
2
•
Never look into a laser beam. This could result
in damage to eye sight. In the event that a laser
beam enters your eye, immediately close your eye
and move your head out of the line of the laser
beam. It is not possible to use standard eye pro-
tection aids such as for example sun glasses with
UV filters for protection against the laser. Never
view the beam with optical devices.
•
Never point the laser beam at people, animals or
at yourself.
•
Do not use the device in an environment with an
explosion or fire hazard, where there are flamma-
ble materials, flammable gases or dust.
