4 - 8
Page Date: 20. April 2002
Section 4
Normal Procedures
Pilot´s Operating Handbook
EXTRA 300L
4.8
LANDING PROCEDURES
4.8.1
DESCENT
1. Throttle
- Reduce
2. Mixture
- "FULL RICH"
3. RPM Control
- Set to 2400 RPM
4. Trim
- Adjust
5. Fuel selector*
- "ACRO & CENTER TANK"
N O T E*
Although safe operation does not require the use of the tanks in a specific sequence,
it is recommended to set fuel selector to "ACRO & CENTER TANK" position!
4.8.2
APPROACH
1. Boost pump
- ON
2. Mixture
- set to "RICH"
3. Airspeed
- reduce to approach speed
4. Propeller
- set to low pitch ("HIGH RPM")
N O T E
It is recommended to set the RPM to 2400 during approach and landing in order to
avoid unnecessary noise.
In case of "Go Around", RPM control must be set to max. RPM before applying po-
wer.
4.8.3
BEFORE LANDING
1. Landing approach
- proceed
2. Airspeed on final
- maintain 78 KIAS (144 km/h)
3. Elevator trim
- adjust
N O T E
Stall speed will be:
MTOW = 820 kg:
55 KIAS (102 km/h)
MTOW = 870 kg:
57 KIAS (106 km/h)
MTOW = 950 kg:
60 KIAS (111 km/h)
4.8.4
NORMAL LANDING
1. Landing
- perform as practicable
with respect to surface
and weather condition
2. Touchdown
- 3 point landing
Page Date: 31. March 2009
Summary of Contents for 300L
Page 2: ...Left blank intentionally ...