ENGLISH
Cleaning and maintenanCe
always follow the indiCations in maximum safety!
Make sure that the power supply cable plug is disconnected, since the generator could be programmed to switch-on.
That the generator is completely cold.
The ashes are cold.
Guarantee effective ventilation of the room when cleaning the product.
Lack of cleaning jeopardises correct operation and safety!
maintenanCe
For correct functioning, the generator must undergo routine maintenance by a qualified technician, at least once a year.
The periodic controls and maintenance must always be performed by specialised technicians, which operate in compliance with the
regulations in force and the indications given in this use and maintenance manual.
PeriodiC Cleaning by the user
As indicated in this use and maintenance manual, periodic cleaning must be performed paying great attention, after having read the
indications, to the procedures and times described herein.
Cleaning the surfaCes and Covering
never use abrasive or chemically aggressive detergents for cleaning!
The surfaces must be cleaned when the generator and covering are completely cold. For maintenance of surfaces and metal parts, just use a
cloth dampened in water or water and neutral soap.
Failure to comply with the indications can damage the surfaces of the generator and cause the warranty to become null and void.
Cleaning the CeramiC glass
never use abrasive or chemically aggressive detergents for cleaning!
The ceramic glass must only be cleaned when cold!
To clean the ceramic glass, just use a dry brush and newspaper dampened and passed through the ash. If the glass is very dirty, use a detergent
specific for ceramic glass exclusively. Spray a modest amount on a cloth and use it on the ceramic glass. Do not spray the detergent or any
other liquid directly onto the glass or gaskets!
Failure to comply with the indications can damage the surface of the ceramic glass and cause the warranty to become null and void.
Cleaning the Pellet hoPPer
When the hopper is completely empty, disconnect the generator power supply cable and first remove the residues (dust, shavings, etc.) from
the empty hopper before filling it.
every year have the fumes exhaust Plant, fume duCts and "t" fittings and insPeCtion CaPs Cleaned
- bends and horizontal stretChes if Present!
the Cleaning freQuenCy of the generator is indiCative! it dePends on the Quality of the Pellets
used and freQuenCy of use.
these oPerations may have to be Performed more freQuently.
every day
sCraPers:
The heat exchangers must only be cleaned when cold! Its cleaning
guarantees constant heat output over time. This maintenance
must be performed at least once a day. To do this, use the scrapers
positioned in the upper part of the generator, making upward and
downward moments several times.
THE FOLLOWING IMAGES ARE ILLUSTRATIONS ONLY.
TO FIND OUT WHICH IS YOUR NEAREST AFTER-SALES CENTRE, CONTACT YOUR DEALER OR VISIT THE WEBSITE
WWW.LANORDICA-EXTRAFLAME.COM
THE IMAGES ARE ILLUSTRATIONS ONLY.
27
