7
Q8 HALF WALL INSTRUCTIONS
3.
Insert the top section of the of the Wall Strip
Keda into the tracking of the Upper Leg of
Canopy.
9.
Bottom of Half Wall. Insert the Half Wall
Keda into the Support Bar and slide fabric
along Bar
6.
Top of Half Wall. Insert the Half Wall Keda
into the Half Wall Support Bar and slide fabric
along Bar.
Finished Half Wall.
2.
Slide the Leg Rubber Inserts (2) along the
Keda of the of the Wall Strips. Align to the
bottom of Wall Strip.
8.
Using the supplied tool, tighten the bolt
lightly. Repeat on other side. Adjust the Half
Wall Bar as need to be level and in desired
position, tighten bolts to secure.
5.
Assemble the Half Wall Support Bars for the
top and bottom of the Half Wall.
Zip the Wall Strip and the Half Wall Panel
together.
1.
Unzip the Left and Right Wall Strips on the
Half Wall Panel.
7.
Insert the Wall Strip Keda into the Half Wall
Bar. Insert the Half Wall Support Bar into the
Tracking of the Upper Leg of the Canopy.
4.
Press the Leg Rubber Inserts into the
tracking on the Lower Leg of the Canopy.
Repeat on other side.
10.
Adjust the Half Wall Bar as need to be level
and in desired position, tighten bolts to secure.
Recommended procedure below. For safety reasons it is recommended that 2 persons pack down any tent.
