Install the cowling by sliding it up onto the lower
hooks, from the bottom, and installing the two cowl
screws as shown.
12
Alternately, to install a DA-35 engine, drill the fire-
wall on that mounting pattern and make this small
notch in the firewall as shown to provide clearance
for the throttle pushrod.
Locate the hardware for throttle pushrod.
Assemble the throttle pushrod as shown.
Assemble the throtle pushrod connector onto the
throttle servo arm so that it can spin freely. Add a
drop of CA to the nut to lock it in place so it doesn’t
vibrate off.
Install the standoffs which came with your DA en-
gine using loctite.
Install the throttle servo as shown. The throttle
pushrod installs as shown.
Install the engine and muffler. using loctite on all
screws.
Summary of Contents for slick 580 exp
Page 1: ......
