Tech Line: 651-357-1874 | boatliftboss@extrememax.com | www.extrememax.com
3
Assemble the Mounting Bracket
1. Insert the spacer bar into the mounting bracket and align the holes.
2. Insert two 3/8” bolts and hand tighten until the ends of the bolts are flush with the bottom of the spacer bar.
Bracket Applications
Most lifts will require both the mounting and offset bracket for proper positioning. Some lifts may only need the mounting
bracket. In either case, the bracket configuration should position the torque arm 1” - 1.5” from the lift wheel.
Determining Placement with Offset Bracket
Determining Placement with Mounting Bracket
1”-1.5”
1”-1.5”
The mounting
bracket should
be parallel to
the lift wheel.
The mounting
bracket
should be
perpendicular
to the lift wheel.
