2
If you have any questions regarding this product and its safe use, or if there are any missing or damaged parts, DO NOT return Boat Lift Boss
™
to the retailer.
Call the Boat Lift Boss
™
Service Department at: 651-357-1862 or e-mail - boatliftboss@extrememax.com
Tools Required for Installation
• 9/16" (1.42cm) socket with ratchet
• 9/16" (1.42cm) wrench
• 10mm wrench
Installation Kit Contents:
Qty. Description ...........................................................................................No.
1 - Instruction Sheet
1 - Torque Arm .................................................................................................#1
1 - Tapered Drive Shaft ...................................................................................#2
1 - Loctite
®
........................................................................................................#3
1 - Hardware Kit (1103.1216)
1 - 3/8” x 1-1/4” (0.95cm x 3.17cm) Diameter Thick Fender Washer .....#4
1 - 3/8” (0.95cm) Lock Washer ..................................................................#5
1 - 3/8” x 2-1/4” (0.95cm x 5.71cm) Main Mounting Bolt, 24 Pitch ........#6
2 - 3/8” x 1-1/4” (0.95cm x 3.17cm) Bolt...................................................#7
4 - 3/8” (0.95cm) Flat Washer ...................................................................#8
2 - 3/8” (0.95cm) Serrated Flange Nut......................................................#9
1 - 5/8” x 3” (1.58cm x 7.62cm) Hardened Tap Bolt Puller, 18 Pitch....#10
Rubber Plug
Loctite
®
#2
#10
#6
#7
#4
#8
#3
#1
#5
#9
Congratulations! You’re minutes away from the
convenient and quiet operation of Boat Lift Boss
™
.
#9
#9
#8
1
#8
#2
#8
#7
#4
#5
#6
#8
#7
Important:
The Puller Bolt is not used for
installation. It is required for uninstalling
your Boat Lift Boss. Please put the Puller
Bolt in a safe place. Instructions can be
found on the Boat Lift Boss™ Maintenance
& Service sheet in the motor packaging box.
#10
