4
If you have any questions regarding this product and its safe use, or if there are any missing or damaged parts, DO NOT return Boat Lift Boss
™
to the retailer.
Call the Boat Lift Boss
™
Service Department at: 651-357-1862 or e-mail - boatliftboss@extrememax.com
Maintenance
Inspect Boat Lift Boss™ and electrical connections regularly to insure that all parts
Storage
Cover Boat Lift Boss™ to prevent damage from snow, rain, ice, and UV rays.
Back-Up Drive
During power outage, use a drill with a 1/4” extension and a 7/16” or 1/2” socket on the bottom of the motor shaft. Counter-
clockwise lifts boat and clockwise lowers boat.
Removal
1) Completely lower the lift rack so there is no tension on the winch cable.
2) To remove Boat Lift Boss™ for service, use the puller supplied with the hardware kit.
3) Remove the rubber plug and 3/8” mounting bolt and washer.
4) Use a ratchet with a 15/16” socket to install puller bolt into the threads located behind the black plug.
5) Hand tighten the threaded bolt. With the socket wrench, tighten 1/4 to 1/2 turn or until Boat Lift Boss™ separates from the boat
lift.
Washer
3/8” Mounting Bolt
Puller Bolt
