2/11/2020
AP305C and AP305CX Hardware User Guide
docs.aerohive.com/330000/docs/help/english/ng/Content/hardware/ap/ap305c-ap305cx.htm?Highlight=ap305c
13/16
One dual band antenna is shared between Wi-Fi and BLE
ETH0 Ethernet port
: autosensing 10/100/1000G BASE-T/TX Mbps, with IEEE 802.3af- or 802.3at-compliant PoE,
and requires Cat5 or better cable.
TPM chip for added security.
Antenna Gain
AP305C
WiFi/BLE 2.4 GHz: 2.7 dBi gain max
WiFi 5 GHz: 4.0 dBi gain max
AP305CX
WiFi/BLE 2.4 GHz: 3dBi max
WiFi 5 GHz: 5.0 dBi gain max
Antenna Plots
The antenna plots for these devices are available below. The Ethernet port location is noted on each chart.
AP305C
Antenna 1
Antenna 2
Antenna 3
Antenna 4
AP305CX
Antenna 1
Antenna 2
Antenna 3
Antenna 4
Power and Environmental Specifications
Power Specifications
Power Consumption
Environmental Specifications
Regulatory Compliance Statements
The regulatory compliance statements in this section apply to Extreme Networks AP305C and AP305CX devices.
Japan Indoor Use
For Japan, the AP305C and AP305CX are restricted for indoor use in the 5150-5350 MHz band only.
Japan Equipment VCCI-B Statement
Compliance Statement - Europe
EU Declaration of Conformity
View full CE Declaration of Compliance and this information online at
www.aerohive.com/support/regulatory-compliance
Extreme Networks, Inc. declares that this device complies with the essential requirements of the Radio Eqiupment Directive
2014/53/EU.
