Power Source
The AP460i and AP460e access points have one Power over Ethernet (PoE) PD converter that supplies
main power to all the downstream.
Power source
Description
PoE
Power is provided through the RJ45 Ethernet
ports of AP460i/e, compliant to be powered with
802.3at and 802.3bt to provide full functionality.
For reduced functionality, use 802.3af.
AP460i/e Power Tables
Table 3: AP460i power table
AP460i
802.3af
802.3at
Radio 0 (sensor)
2.4G – 2×2 (20 dBm)
5G – 2×2 (22 dBm)
2.4G – 2×2 (20 dBm)
5G – 2×2 (22 dBm)
Radio 1 (2.4G)
2×2 (23 dBm)
2×2 (23 dBm)
Radio 2 (5G)
2×2 (22 dBm)
4×4 (22 dBm)
BLE
On
On
Table 4: AP460e power table
AP460e
802.3af
802.3at
Radio 0 (sensor)
2.4G – 2×2 (19 dBm)
5G – 2×2 (20 dBm)
2.4G – 2×2 (19 dBm)
5G – 2×2 (20 dBm)
Radio 1 (2.4G)
2×2 (22 dBm)
2×2 (22 dBm)
Radio 2 (5G)
2×2 (20 dBm)
4×4 (20 dBm)
BLE
On
On
LED Indicators
There are seven LEDs located on the front face of the access point but are not visibly marked.
AP460i/e Overview
Power Source
ExtremeWireless™ AP460i/e Access Points
11
