Access Point Mounting Options and Bracket Information
The access points can be mounted on a wall or to a pole by purchasing separate mounting brackets,
which are described in the following table:
Table 8: Mounting bracket usage
Mounting bracket and
part number
Wall install
Pole install
Notes
KT-147407-02 bracket
Yes
Yes
The KT-147407-02
bracket has three parts:
• Flat part
• 1-axis tilt part
• Pole part
For attaching to a wall
or a flat surface, use the
bracket part that has
two holes on the surface
of the metal portion,
also called the flat part.
For attaching to a pole,
if the 1-axis tilt is not
required, attach the pole
part of the bracket to
the access point. If 1-axis
tilt is required, attach
the pole part of the
bracket on top of the
second wall part.
KT-150173-01 extension
arm. It can be used with
KT-147407-02 bracket
parts, to provide an
extension or a tilt
Yes. Use the
KT-147407-02 flat wall
mount part, if you need
a bracket tilt during
installation
Yes. Use the
KT-147407-02 bracket
pole part or use all three
KT-147407-02 bracket
parts
The KT-150173-01
extension arm can also
be used by itself without
the other KT-147407-02
bracket parts.
MBO-ART02 10 in. 2-
axis articulating
mounting bracket
Yes
Yes. Attach the MBO-
ART02 articulating
mounting bracket to the
WS-MBO-POLE01
bracket
The wall must be strong
enough to support the
access point during
inclement weather.
Install the Access Point
Access Point Mounting Options and Bracket Information
ExtremeWireless™ AP460i/e Access Points
15
