AP460i/e Overview
on page 8
on page 11
Access Point Purchase Order Information
The AP460i/e access points are outdoor model enterprise class 802.11ax access points. The “i” in
AP460i indicates that the access point comes with internal antennas and the “e” in AP460e indicates
that it comes with external antenna connectors. The access points feature a dual-band radio, two band-
locked radios, eight WiFi internal or external antennas, and one Bluetooth Low Energy (BLE) antenna.
The AP460i/e can be mounted on a flat surface such as a wall or to a pole.
Note
The AP460i/e requires a minimum base firmware of WiNG 7.3.0.
In this document, the access point is addressed as AP460i/e wherever the procedure and general
information is applicable to both access points.
AP460i/e Features
The AP460i/e access points have the following features:
•
Radios:
◦
Three 802.11ax radios (one 2×2 2.4GHz radio, one 4×4 5GHz radio, and one 2×2 2.4GHz and 5GHz
radio)
◦
1 IoT radio (2.4 GHz)
•
Console port: RJ45
•
Two Ethernet ports:
◦
1×100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45
◦
1×10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
•
LEDs: Seven. All LEDs will be on during reset and connect to general-purpose input/output (GPIO)
pins
•
One Reset button
•
Power: PoE 802.3at (for more information on power used at 802.3af and 802.3at modes, see
)
8
ExtremeWireless™ AP460i/e Access Points
