manualshive.com logo in svg

Extreme Networks BlackDiamond X8 Series, Hardware Installation Manual

The Extreme Networks BlackDiamond X8 Series is a cutting-edge networking solution, offering unmatched performance and scalability. Explore its full potential with our comprehensive datasheet and user manual, which can be easily downloaded for free from our website. Upgrade your network today with Extreme Networks.

Share
Download
background image

 

Contents

BlackDiamond X8 Series Switches Hardware Installation Guide

4

Rack Specifications and Recommendations ...................................................................................................37

Mechanical Recommendations for the Rack............................................................................................38
Protective Grounding for the Rack ...........................................................................................................38
Space Requirements for the Rack ...........................................................................................................39
Securing the Rack....................................................................................................................................39

Evaluating and Meeting Cable Requirements ........................................................................................................40

Cabling Standards...........................................................................................................................................40
Cable Labeling and Record Keeping ..............................................................................................................40
Cable Distances ..............................................................................................................................................41
Installing Cable................................................................................................................................................42

Fiber Optic Cable .....................................................................................................................................43

Radio Frequency Interference.........................................................................................................................43

Meeting Power Requirements ................................................................................................................................44

Power Supply Requirements...........................................................................................................................44
AC Power Cord Requirements ........................................................................................................................45
Uninterruptible Power Supply Requirements ..................................................................................................45

Selecting a UPS .......................................................................................................................................45
Calculating Volt-Amperage Requirements ...............................................................................................46
UPS Transition Time ................................................................................................................................46

Applicable Industry Standards................................................................................................................................46

Chapter 5: Installing a BlackDiamond X8 Series Chassis .................................................................... 47

Unpacking the Chassis...........................................................................................................................................47
Pre-Installation Requirements ................................................................................................................................50
Rack-Mounting the Chassis....................................................................................................................................51
Grounding the Chassis ...........................................................................................................................................54
Installing Power Supplies .......................................................................................................................................54
Connecting Power ..................................................................................................................................................58

Chapter 6: Installing BlackDiamond X8 Series Modules ...................................................................... 59

Installation Order ....................................................................................................................................................59
Required Tools .......................................................................................................................................................59
Installing Fabric Modules........................................................................................................................................60
Installing Management Modules.............................................................................................................................64
Installing I/O Modules .............................................................................................................................................65
I/O Module Blanks ..................................................................................................................................................67

Installing a Module Blank ................................................................................................................................68

Initial Management Access ....................................................................................................................................69

Connecting Equipment to the Console Port ....................................................................................................69
Logging In for the First Time ...........................................................................................................................69

PART 3: MAINTENANCE PROCEDURES

Chapter 7: BlackDiamond X8 Maintenance Procedures ....................................................................... 73

Replacing a Power Supply .....................................................................................................................................74
Replacing a Fan Tray .............................................................................................................................................76
Replacing a Fabric Module.....................................................................................................................................78
Replacing a Management Module..........................................................................................................................82

Removing a Management Module ..................................................................................................................82
Installing a Management Module ....................................................................................................................84
Installing a Management Module Blank ..........................................................................................................85

Replacing an I/O Module ........................................................................................................................................86

Removing an I/O Module ................................................................................................................................86
Installing an I/O Module ..................................................................................................................................87
Installing I/O Module Blanks............................................................................................................................88

Summary of Contents for BlackDiamond X8 Series

























































































































Reviews:

No comments

Related manuals for BlackDiamond X8 Series

TE TECP-90-703 Installation Manual preview
TECP-90-703
Brand: TE Pages: 8
InWin IW-RJ448-05 User Manual preview
IW-RJ448-05
Brand: InWin Pages: 57
Patton electronics ForeFront 6676 User Manual preview
ForeFront 6676
Brand: Patton electronics Pages: 50

Brands by name

Popular brands

Load more brands