manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

 

Navigating the EPICenter Applications

EPICenter Software Installation and User Guide

81

• Config

 runs the Configuration Manager, where you can upload and download switch configuration 

files, and download ExtremeWare software to your switches. 

• Find  IP/MAC

 runs the IP/MAC Address Finder applet, where you can search for the ports 

associated with one or more MAC or IP addresses, or identify the IP or MAC addresses connected to 
a set of ports. 

• Groups

 runs the Grouping applet. 

• Telnet

 runs an interactive Telnet application where you can create and run command-line macros on 

multiple devices in one operation. You can also establish telnet sessions with individual switches, 
both Extreme Networks and third-party devices. 

• EView

 runs the ExtremeView applet, where you can view status and statistics about your managed 

devices, and do Extreme device configuration through Extreme Networks’ interactive web-based 
device interface, ExtremeView Vista. 

• RT  Stats

 runs the Real Time statistics applet, that provides graphs of various device and port 

statistics. 

• Topology

 runs the Topology applet, which gives you a hierarchical, logical map-based view of your 

network topology. 

• VLAN

 runs the VLAN Manager, where you can set up and manage VLANs. 

• ESRP

 runs the ESRP Manager, which lets your view the status of your ESRP-enabled switches and 

VLANs. 

• Admin

 runs the Administration module, where a user with Administrator access can administer 

EPICenter user accounts and the RADIUS server. Other users can change their own password using 
this applet. 

• STP

 runs the STP Monitor, which lets you view the status of devices and VLANs configured for STP. 

The devices must be running ExtremeWare 6.2.2 or later in order to be monitored by EPICenter. 

• Reports

 runs the Dynamic Reports module, where you can run a number of pre-defined 

HTML-based reports from data in EPICenter’s inventory database. You can also define your own 
reports. 

• Logoff

 ends your session and returns you to the Login display. 

NOTE

Note that you must have Administrator or Manager access in order to use most of the functions of these 
applets. Users with Monitor access will be able to view status, statistics etc., but will not be able to set 
up or change EPICenter or device configurations. 

In addition to the applets described above, the Navigation Toolbar may include icons for other optional 
applications that have been integrated into the EPICenter server. These modules or products are 
typically purchased separately, and enabled via special license keys. Documentation for these modules 
is provided separately from the main EPICenter documentation. These include:

• Policy

 runs the EPICenter Policy Manager, where you can define QoS policies and access list rules 

for implementation on Extreme Networks and Cisco devices. This applet is an optional module that 
is licensed separately. It requires the installation of a separate license key. This applet is not available 
in scalability mode. 

• ServiceWatch

 runs the EPICenter ServiceWatch software within the EPICenter client browser. 

ServiceWatch is not an EPICenter module, but a separate product. You can enable the integration 
into the EPICenter Navigation Toolbar through the Server Properties pages in the EPICenter 
Administration applet. 

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

Dragon Systems DRAGON NATURALLYSPEAKING ESSENTIALS Quick Start Manual preview
DRAGON NATURALLYSPEAKING ESSENTIALS
Brand: Dragon Systems Pages: 26
Nortel CC MIS User Manual preview
CC MIS
Brand: Nortel Pages: 374
Crestron e-control Database Manager User Manual preview
e-control Database Manager
Brand: Crestron Pages: 94
IBM Tivoli ADSTAR User Manual preview
Tivoli ADSTAR
Brand: IBM Pages: 62
3Com SUPERSTACK II HUB 10 24-PORT TP User Manual preview
SUPERSTACK II HUB 10 24-PORT TP
Brand: 3Com Pages: 8
3Com 3CWXMUPA Release Note preview
3CWXMUPA
Brand: 3Com Pages: 8
AVG LINKSCANNER User Manual preview
LINKSCANNER
Brand: AVG Pages: 47
KINGDOM COMPUTER OPERATED VIDEO CAMERA SYSTEM Installation & User Manual preview
COMPUTER OPERATED VIDEO CAMERA SYSTEM
Brand: KINGDOM Pages: 21
Texas Instruments NoteFolio Software Manual preview
NoteFolio
Brand: Texas Instruments Pages: 37
3Com 3C19250 - USB Ethernet Network Interface Card User Manual preview
3C19250 - USB Ethernet Network Interface Card
Brand: 3Com Pages: 16
noveltech CHARACTER Manual preview
CHARACTER
Brand: noveltech Pages: 13
Yamaha LS9 Editor User Manual preview
LS9 Editor
Brand: Yamaha Pages: 24
Xerox Wide Format 6050 Customer Training Manual preview
Wide Format 6050
Brand: Xerox Pages: 50
Tandberg Data B DLTSAGE INTEGRATION Integration Manual preview
B DLTSAGE INTEGRATION
Brand: Tandberg Data Pages: 36
IBM BS029ML - WebSphere Portal Server Self Help Manual preview
BS029ML - WebSphere Portal Server
Brand: IBM Pages: 242
Datavideo CG-100 User Manual preview
CG-100
Brand: Datavideo Pages: 141
Extreme Networks Ridgeline 3.0 Installation Manual preview
Ridgeline 3.0
Brand: Extreme Networks Pages: 60
Acer AR360 F2 Manual preview
AR360 F2
Brand: Acer Pages: 37

Brands by name

Popular brands

Load more brands