The WS-AP3825e has dual Ethernet (LAN) ports for fault-tolerant network connection and failover.
For a list of supported antennas for the WS-AP3825e, see
Figure 6: AP3825e External Antenna Cable Installation
1
(not used)
6
Reset Switch
2
Console Port
7
LEDs
3
External DC Power Supply Port
8
(bottom) Kensington Lock Slot
4
LAN Port 1
9
External antenna connectors (6 R-SMA)
5
LAN Port 2
Refer to the
IdentiFi Wireless WS-AP3825i & WS-AP3825e Installation Guide
for information about AP
installation procedures.
ExtremeWireless AP3805e
The WS-AP3805 is designed to extend your wireless LAN around indoor locations. It operates fully with
the Extreme Networks wireless LAN, including support for Extreme Networks wireless VoWLAN, branch
office mode, availability and mobility features. This AP operates in 802.11ac and 802.11n mode and also
support 802.11a/802.11g and 802.11b standard legacy devices. It includes mounting brackets. It can be
powered directly through the LAN using Power over Ethernet (PoE), or by an external adapter. An
optional, external 12V DC power supply (WS-PSI12V-MR1) may be ordered separately to power the WS-
AP3805 from a standard AC wall outlet.
For a list of supported antennas for the WS-AP3805e, see
on page 14.
ExtremeWireless APs That Support External Antennas
ExtremeWireless™ External Antenna with Wave 2
21
