Table 11: Mount Kit Contents
Item
Quantity
Description
1
4
Nut, 5/16-18,1/2" Hex. 17/64" Thick, Steel Grade 2,NlZN Trivalent
2
1
Bolt, Carriage, 5/16-18 x 3/4
3
1
Bracket, Mount. Antenna
4
1
Bolt, 5/16-18 x 2 1/2", Hex Head, Steel, Nl ZN Trivalent
5
1
Tube, Aluminum, 0.37" ID x 0.50" OD x 1.415"
6
4
Washer, Flat, 5/16, 5/8" OD x 11/32" ID x 0.065", Steel, Zinc
7
4
Washer, Split Lock, 5/16, Steel Grade 2, Nl ZN Trivalent
8
1
Bracket, Mount, Antenna
9
1
Screw, Hex Head, 1/4-20 x 2.0,18-8 SS
10
1
Nut, Hex, Nylock, 1/4-20 UNC
11
1
V-Bolt, 5/16-18 UNC-2A, Med. Carbon Steel, Nl ZN Trivalent
12
4
Washer, 1/4 Flat, Steel Grade 2, Nl ZN Trivalent
13
4
Nut, Hex 1/4-20, Steel Grade 2, Nl ZN Trivalent
14
4
Washer, 1/4, Split Lock, Steel Grade 2, Nl ZN Trivalent
Tools required for attaching mount to antenna and securing to pole:
•
7/16 inch wrench
•
1/2 inch wrench
To install the antenna:
1 Remove the antenna and mount kit from the packaging, and remove the mount kit contents from its
packaging. Confirm that the mount kit includes the contents listed in
2 Install 1/4-20 x 2" screw (item 9) into the bracket (item 8) with one hole on each flange. Secure with
lock nut (item 10). Tighten only until the nut contacts the bracket. Do not over tighten.
Figure 9: Install Screw in Bracket
Antenna Installation
ExtremeWireless™ External Antenna with Wave 2
28