Extreme Networks ExtremeWare 7.5 Command Reference Manual Download

Page: 1349 / 2546

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.show wireless ports interface ap-scan results

ExtremeWare 7.5 Command Reference Guide

1349

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine

switches.

show wireless ports interface ap-scan results

show wireless ports [<portlist> | all] interface [1 | 2] ap-scan results

{detail}

Description

Displays information about the results of an access point (AP) scan from the port perspective.

Syntax Description

Default

N/A

Usage Guidelines

Use this command to see the results of an AP scan. Use the optional keyword,

detail

, to see all of the

fields in Table 25.

portlist

Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.

all

Specifies all active ports.

interface

Specifies an interface: 1 or 2.

detail

(Optional) Specifies to display the information in detailed format.

Table 26:

AP Scan Results (Alphabetized)

Data Value

Description

APMAC

MAC address of the discovered AP

Capability

Capability field from a received information packet (in detail output only)

Channel

The channel on which this AP was discovered

ESS Name

String ESS ID I.E.

Last Update

Time value at which this entry was updated

Min/Max/Avg RSS

Received Signal Strength statistics

Network Type

Ad-hoc or BSSID network (in detail output only)

Number of beacons

Count of beacon packets seen from this AP (in detail output only)

Number of probe resp

Count of PROBE RESP packets sent from the AP (in detail output only)

Supported Rate Set

List of supported rates

WEP required/WEP
authentication supported

WEP information from beacon and probe packets

WPA

WPA information, including authentication and supported encryption algorithms

«
...
1347
1348
1349
1350
1351
...
»

Summary of Contents for ExtremeWare 7.5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.5, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands