Extreme Networks ExtremeWare 7.5 Command Reference Manual Download

Page: 215 / 2546

show management

ExtremeWare 7.5 Command Reference Guide

215

show management

Description

Displays the SNMP settings configured on the switch.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines:

The following show management output is displayed:

•

Enable/disable state for Telnet, SNMP, and web access

•

SNMP community strings

•

Authorized SNMP station list

•

SNMP trap receiver list

•

For ExtremeWare 4.0 and higher, the following show management output is also displayed:

•

Enable/disable state for SSH2 and access profile information

•

RMON polling configuration

For ExtremeWare 6.2.2 and higher, the enable/disable state of the port-up-down traps is also displayed.

For ExtremeWare 7.0.0 and higher, the enable/disable state of the mac-limit traps is also displayed.

For the “i” Series of Switches.

For ExtremeWare 7.1.0 and higher, the SNMP access display item will

show the additional states of v1, v2c disabled and v3 enabled. The flags field was enhanced to show the
SNMP trap groups.

For the “e” Series of Switches.

For ExtremeWare 7.2e and higher, the SNMP access display item will

show the additional states of v1, v2c disabled and v3 enabled. The flags field was enhanced to show the
SNMP trap groups.

Example

The following command displays configured SNMP settings on the switch:

show management

Following is the output from this command:

Summary of Contents for ExtremeWare 7.5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.5, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands