Extreme Networks ExtremeWare 7.5 Command Reference Manual Download

Page: 2308 / 2546

2308

ExtremeWare 7.5 Command Reference Guide

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

enable inline-power slots

For the Alpine series I/O modules:

enable inline-power slots <slot_id>

For the Summit 300-48 switch:

enable inline-power slot <slot_id>

Description

Enables power provided to the specified slot.

NOTE

This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.

Syntax Description

Default

Enabled

Usage Guidelines

You can control whether inline power is provided to a specific slot by using the

disable inline-power

slots <slot_id>

command and the

enable inline-power slots <slot_id>

command. Using the

enable

inline-power slots <slot_id>

command makes power available to the selected slot. Using the

disable

inline-power slots <slot_id>

command shuts down power currently provided to the selected slot. The

system defaults to enabling power on all slots.

To power any port, the following conditions must exist:

•

The system must be enabled for power.

•

The slot must be enabled for power.

•

The ports must be enabled for power.

Disabling a slot providing power to a powered device (PD) through one of its powered ports
immediately removes power to the PD.

Example

The following command makes power available to slot 2:

enable inline-power slots 2

History

This command was first available in ExtremeWare 7.2.

This command was first available in ExtremeWare 7.3e.

slot_id

Specifies the slot for which power will be enabled.

«
...
2306
2307
2308
2309
2310
...
»

Summary of Contents for ExtremeWare 7.5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.5, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands