show ports stats
ExtremeWare 7.5 Command Reference Guide
799
•
Received Byte Count (RX Byte Count)—The total number of bytes that were received by the port,
including bad or lost frames. This number includes bytes contained in the Frame Check Sequence
(FCS), but excludes bytes in the preamble.
•
Received Broadcast (RX Bcast)—The total number of frames received by the port that are addressed
to a broadcast address.
•
Received Multicast (RX Mcast)—The total number of frames received by the port that are addressed
to a multicast address.
For version 2.0 and 4.0
•
Disabled and Not Present are not available as link status indicators.
•
Chassis is available as a link status indicator. If chassis is listed, the link is connected to a Summit
Virtual Chassis.
Examples
The following command displays port statistics for ports 1 through 3 on a stand-alone switch:
show ports 1-3 stats
The following command displays port statistics for slot 1, ports 1 through 3 on a modular switch:
show ports 1:1-1:3 stats
The following command displays port statistics for all ports:
show ports stats
The output produced by the
show ports stats
command is similar to the following:
Port Statistics
Thu Jul 8 09:50:50 2004
Port
Link
Tx Pkt
Tx Byte
Rx Pkt
Rx Byte
Rx
Rx
Status
Count
Count
Count
Count
Bcast
Mcast
================================================================================
1:1
A
740131
61671211
201310
17023242
7
3963
1:2
A
292131
24686533
896516
183343391
37
21456
1:3
A
37273
4351318
37578
4721313
36
21551
1:4
R
0
0
0
0
0
0
1:5
R
0
0
0
0
0
0
1:6
A
1099
375858
11962
901306
4421
7541
1:7
R
0
0
0
0
0
0
1:8
A
1099
375858
0
0
0
0
The following command displays cable diagnostics information for all ports:
show ports stats cable-diagnostics
The output produced by the
show ports stats cable-diagnostics
command is similar to the
following:
Port Statistics
Thu Jul 8 09:52:19 2004
Port
Link
Num
Diags
Diags
Diags
Status
Diags
Success
Fail
Change
================================================================================
1:1
A
0
0
0
0
1:2
A
1
1
0
0
1:3
A
0
0
0
0
1:4
R
0
0
0
0
Summary of Contents for ExtremeWare 7.5
