manualshive.com logo in svg

Extreme Networks ExtremeWare 7.7, Command Reference Manual

The Extreme Networks ExtremeWare 7.7 is a powerful networking software designed to optimize performance and enhance network security. Unlock the full potential of your network with the Command Reference Manual, available for free download on our website 88.208.23.73:8080. This comprehensive manual provides detailed instructions for maximizing the capabilities of this exceptional product.

Share
Download
background image

 

1366

ExtremeWare 7.7 Command Reference Guide

Wireless Commands

enable wireless ports interface ap-scan off-channel

enable wireless ports <portlist> interface [1 | 2] ap-scan off-channel [at 

| every] <time>

Description

Starts the access point (AP) scan on the indicated interface at the specified time.

Syntax Description

Default

N/A

Usage Guidelines

Use this command to schedule the off-channel AP scan. During an “off-channel” scan, the Altitude 300 
is not available for user traffic.

Example

The following command enables port 23 using interface 1 on the Summit 300-24:

enable wireless ports 23 interface 1 ap-scan off-channel at 18

History

This command was first available in ExtremeWare 6.2a and added to the “

e

” series in 7.3e.

Platform Availability

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 
switches.

portlist

Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form 
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8. 

interface

Specifies an interface: 1 or 2.

at

Specifies a once-only start time for a scan.

every

Specifies to start the scan every day at the specified time.

time

Specifies the hour in the format (0-23)

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare 7.7

Canon iR2270 Series Product Description preview
iR2270 Series
Brand: Canon Pages: 2
Canon Pixma Pro9500 Series Manual preview
Pixma Pro9500 Series
Brand: Canon Pages: 31
Canon PowerShot SD430 DIGITAL ELPH WIRELESS Software & Wireless Manual preview
PowerShot SD430 DIGITAL ELPH WIRELESS
Brand: Canon Pages: 130
Canon PowerShot SD880 IS Digital ELPH Software Starter Manual preview
PowerShot SD880 IS Digital ELPH
Brand: Canon Pages: 83
Canon Selphy CP600 Printer Software Manual preview
Selphy CP600
Brand: Canon Pages: 34
Canon N1240U - CanoScan Flatbed Scanner User Manual preview
N1240U - CanoScan Flatbed Scanner
Brand: Canon Pages: 109
XenSource DL385 - ProLiant - G5 Manual preview
DL385 - ProLiant - G5
Brand: XenSource Pages: 313
IBM System Storage DS3000 Installation Manual preview
System Storage DS3000
Brand: IBM Pages: 38
IBM Nways 8260 Installation Instructions Manual preview
Nways 8260
Brand: IBM Pages: 25
Teklynx Form Designer User Manual preview
Form Designer
Brand: Teklynx Pages: 30
ShoreTel ShoreWare User Manual preview
ShoreWare
Brand: ShoreTel Pages: 25
ICP ICP Controller Using Manual preview
ICP Controller
Brand: ICP Pages: 16
VegaStream Vega Gateway Engineer'S Manual preview
Vega Gateway
Brand: VegaStream Pages: 33
Blackberry TICKETMASTER - LEARN MORE User Manual preview
TICKETMASTER - LEARN MORE
Brand: Blackberry Pages: 7
Symantec WISE INSTALLATION EXPRESS 7.0 SP2 Getting Started Manual preview
WISE INSTALLATION EXPRESS 7.0 SP2
Brand: Symantec Pages: 50
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2
Sony D-NE326CK - Atrac Cd Walkman Portable Player Specifications preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands